|Inrush current||Cold start 45A/230VAC|
|Ripple and noise||150mVp-p||150mVp-p|
|Set up,rise time||2000ms，50ms/（230VAC) 100% load|
|Hold up time||20ms/230VAC 100% laod|
|EMC||EMS||Design refer to:EN55024 ;EN61000-4-2,3,4,5,6,8,11|
|Harmonic current||Design refer to:GB17625.1;EN61000-3-2,-3|
|EMC||Design refer to:EN55022，Class A|
|Safety||Safety standard||Design refer to:GB4943/UL1012|
|Withstand voltage||I/P-O/P:1.5KVac/10mA; I/P-CASE:1.5KVac/10mA; O/P-CASE:0.5KVAC/10mA Testing
|I/P-O/P:100M ohms; I/P-Case:100M ohms; O/P-Case:100M ohms|
|Over load||110～150% rated Hiccup mode, recovers automatically after fault condition is
|Short circuit||Hiccup mode, recovers automatically after fault condition is removed|
|Environment||Working temperature and
|-30~70℃ 20%~95%RH no condensing （refer to derating curve)|
|Storage temperature and
|-40℃~85℃; 10%~95%RH no condensing|
|Vibration||Frequency range 10 ~ 500Hz,acceleration 2G, each sweep cycle for 10min, 6 sweep
cycles along X, y, Z axis
|Shock||Acceleration: 20g, duration: 11ms, 3 impacts along X, y, Z axis|
|Altitude||2000mtrs（for every 100 m higher than 2000 m, the ambient temperature decreases
by 0.6 ℃）
|Reliability||MTBF||25℃:250000Hrs, MIL-217 Method|
|Cooling mode||☑ Free air □ Fan|
|Extension mode|| three proofings terminal cover Low temperature start（-40℃） Others|
|Note||*In order to extend the lifetime, it is recommended to configure the load more than 30% of the remaining allowance. For example: the power of the device requires 100W, then use the power of not less than 130W.
*Ripple test method: 20MHz oscilloscope in power output terminal test, oscilloscope probe wire length is not more than 12mm, and input parallel 47uF electrolytic capacitors and 0.1uF high frequency capacitance probe.
*All electrical performance tests are performed at 25 C.
*When the product is used in full load, the aluminum plate with an area of 400 * 400 * 3mm shall be added for auxiliary heat dissipation.
*The power supply is a part of the components of the equipment system. All EMC tests are conducted by
A-200AF-5DW is Led display power supply without fans. The input voltage range is 180~264VAC and output voltages are 2.8V、3.3V、3.8V、4.2V、4.5V、5V. It can be applied to Led display LED indicator light and other Led display fields. This series product is ultra-thin design, with a height of only 30mm, and can adapt to a variety of box size requirements. Super high efficiency, compact shell design and good heat dissipation ensure the long-term stable work of this series of products.