Support for multiple 4K inputs and outputs
Ultra-HD inputs: 12G-SDI (4K), DP1.2 (4K), HDMI2.0 (4K), HDMI1.3
16x Neutrik Ethernet outputs (Q), single unit loading capacity of 10.4 million pixels
Safe and stable
Support for MultiViewer monitoring, real-time input monitoring, PVW, and PGM
|12G-SDI||4||Supports ST-2082-1 (12G), ST-2081-1 (6G), ST-424 (3G) and ST-292 (HD) standard video inputs.
Input resolutions up to 4K×2K@60Hz and downward compatible Supports 12G-SDI output with loop-through.Note:
When the input source is a 12G-SDI signal, you must use CANARE / L-4.5CHD+ / UHDTV-SDI SDI cables and the cable length should be less than 50 m.
12G-SDI connectors 1, 2 and 3 DO NOT support the deinterlaced function, but connector 4 supports the function.
|DP 1.2||1||Input resolutions up to 4K×2K@60Hz (8K×1K@60Hz) and downward compatible.
Supports HDCP 1.3.
DOES NOT support interlaced signal inputs.
|HDMI 2.0||1||Input resolutions up to 4K×2K@60Hz (8K×1K@60Hz) and downward compatible
Supports HDCP 1.4 and HDCP 2.2.
DOES NOT support interlaced signal inputs. Supports HDMI 2.0 output with loop-through.
|HDMI 1.3||4||D_4×HDMI 1.3 input card by default
Input resolutions up to 1920×1080@60Hz Supports HDCP 1.3.
Supports interlaced signal inputs.
The HDMI input card can be replaced by a D_4×DVI input card.
|Ethernet port||16||Gigabit Ethernet output ports
Maximum loading capacity: 10.4 million pixels
Maximum width: 16384 pixels
Maximum height: 8192 pixels
|OPT 1–4||4||10G fiber optical output ports (copy and hot backup)
OPT 1 transmits data on Ethernet ports 1–8.
OPT 2 transmits data on Ethernet ports 9–16.
OPT 3 is the copy/hot backup channel for OPT 1.
OPT 4 is the copy/hot backup channel for OPT 2.
|MVR||1||HDMI 1.3 connector
A Multiviewer connector to monitor the input source, PVM, PGM or perform mixed monitoring
|AUX||1||HDMI 1.3 connector
An auxiliary output connector for connecting an auxiliary device, such as a teleprompter
|ETHERNET||1||For PC communication or network connection|
|USB||3||1 × USB (Type-B): Connect to the PC for device debugging.
2 × USB (Type-A):Insert a USB drive to perform system update.
Connect a mouse or keyboard.
Output connector for device cascading
|GENLOCK IN-LOOP||1||Connect a synchronization signal source to synchronize the cascaded devices.|
|CONTROL UI||1||Connect to a monitor for displaying the user interface of the embedded Master VI software.|